ISO Bearing
Most rolling bearings follow ISO standard dimensions, which is a prerequisite to enable interchangeability. The ISO general plan for radial bearings provides several series of standardized outside diameters for every standard bore diameter. They are called diameter series and are numbered 7, 8, 9, 0, 1, 2, 3 and 4 (in order of increasing outside diameter). Within each diameter series, different width series exist (width series 8, 0, 1, 2, 3, 4, 5 and 6 in order of increasing width).shows diameter series 0, 2 and 3 combined with width series 0, 1, 2 and 3. For thrust bearings, height series are used instead of width series. Height series are numbered 7, 9, 1 and 2. Bearings to ISO general plans have the same boundary dimensions when they share the same bore diameter and dimension series. If not, they have different boundary dimensions.
The boundary dimensions for metric bearings are standardized in the ISO2) general plans:ISO 15 for radial rolling bearings, except insert bearings, some types of needle roller bearings and tapered roller bearings,ISO 104 for thrust bearings,ISO 355 for tapered roller bearings.
- ISO BK1514 ISO Bearing
- 105 mm
- Split Cylindrical Expansion Type
- ISO 54405 ISO Bearing
- C3
- 95 mm
- 35 mm x 62 mm x 35 mm ISO GE35XDO-2RS ISO Bearing
- LL788300
- LL788345
- 95 mm x 200 mm x 45 mm ISO 1319K ISO Bearing
- METRIC
- 1/30
- 30 mm x 72 mm x 43 mm ISO UC306 ISO Bearing
- 16000
- 16137
- ISO UCTX15 ISO Bearing
- 93000
- 93806A
- ISO 7208 BDB ISO Bearing
- 13600
- 13686
- 38,1 mm x 95,25 mm x 29,9 mm ISO 440/432 ISO Bearing
- Mounted Bearing
- 22213
- 380 mm x 560 mm x 135 mm ISO 23076W33 ISO Bearing
- 80 mm
- 200 mm
- ISO 3319 ISO Bearing
- 28000
- 28138