ISO Bearing
Most rolling bearings follow ISO standard dimensions, which is a prerequisite to enable interchangeability. The ISO general plan for radial bearings provides several series of standardized outside diameters for every standard bore diameter. They are called diameter series and are numbered 7, 8, 9, 0, 1, 2, 3 and 4 (in order of increasing outside diameter). Within each diameter series, different width series exist (width series 8, 0, 1, 2, 3, 4, 5 and 6 in order of increasing width).shows diameter series 0, 2 and 3 combined with width series 0, 1, 2 and 3. For thrust bearings, height series are used instead of width series. Height series are numbered 7, 9, 1 and 2. Bearings to ISO general plans have the same boundary dimensions when they share the same bore diameter and dimension series. If not, they have different boundary dimensions.
The boundary dimensions for metric bearings are standardized in the ISO2) general plans:ISO 15 for radial rolling bearings, except insert bearings, some types of needle roller bearings and tapered roller bearings,ISO 104 for thrust bearings,ISO 355 for tapered roller bearings.
- ISO 7304 CDB ISO Bearing
- 13600
- 13685
- 40 mm x 68 mm x 21 mm ISO NN3008 ISO Bearing
- 14000
- 14139X
- ISO 7332 BDF ISO Bearing
- 3-7/16 in
- Viton Single Lip
- 40 mm x 68 mm x 21 mm ISO NN3008 K ISO Bearing
- 95000
- 95512X
- 15 mm x 32 mm x 9 mm ISO 6002 ZZ ISO Bearing
- 19000
- 19143
- ISO NKS37 ISO Bearing
- 18700
- 18790
- ISO K28x33x17 ISO Bearing
- LM48500
- LM48548C
- ISO 7052 ADB ISO Bearing
- 99000
- 99587
- 234,95 mm x 327,025 mm x 52,388 mm ISO 8575/8520 ISO Bearing
- L319200
- L319249
- ISO 7407 ADB ISO Bearing
- 385
- 386