ISO Bearing
Most rolling bearings follow ISO standard dimensions, which is a prerequisite to enable interchangeability. The ISO general plan for radial bearings provides several series of standardized outside diameters for every standard bore diameter. They are called diameter series and are numbered 7, 8, 9, 0, 1, 2, 3 and 4 (in order of increasing outside diameter). Within each diameter series, different width series exist (width series 8, 0, 1, 2, 3, 4, 5 and 6 in order of increasing width).shows diameter series 0, 2 and 3 combined with width series 0, 1, 2 and 3. For thrust bearings, height series are used instead of width series. Height series are numbered 7, 9, 1 and 2. Bearings to ISO general plans have the same boundary dimensions when they share the same bore diameter and dimension series. If not, they have different boundary dimensions.
The boundary dimensions for metric bearings are standardized in the ISO2) general plans:ISO 15 for radial rolling bearings, except insert bearings, some types of needle roller bearings and tapered roller bearings,ISO 104 for thrust bearings,ISO 355 for tapered roller bearings.
- 50 mm x 110 mm x 27 mm ISO 6310 ZZ ISO Bearing
- LM501300
- LM501349
- 850 mm x 1120 mm x 200 mm ISO 239/850 KCW33+AH39/850 ISO Bearing
- Cylindrical Bore
- Double Shield
- 70 mm x 120 mm x 37 mm ISO 33114 ISO Bearing
- 28000
- 28159
- 380 mm x 520 mm x 140 mm ISO SL024976 ISO Bearing
- LM501300
- LM501349A
- 600 mm x 1090 mm x 155 mm ISO NUP2/600 ISO Bearing
- M38500
- M38549H
- ISO 54411 ISO Bearing
- LM501300
- LM501349
- ISO Q338 ISO Bearing
- 67800
- 67887
- 9 mm x 17 mm x 4 mm ISO FL618/9 ISO Bearing
- 95000
- 95500
- ISO 7022 CDB ISO Bearing
- 14500
- 14585
- ISO HK283824 ISO Bearing
- 28000
- 28158