ISO Bearing
Most rolling bearings follow ISO standard dimensions, which is a prerequisite to enable interchangeability. The ISO general plan for radial bearings provides several series of standardized outside diameters for every standard bore diameter. They are called diameter series and are numbered 7, 8, 9, 0, 1, 2, 3 and 4 (in order of increasing outside diameter). Within each diameter series, different width series exist (width series 8, 0, 1, 2, 3, 4, 5 and 6 in order of increasing width).shows diameter series 0, 2 and 3 combined with width series 0, 1, 2 and 3. For thrust bearings, height series are used instead of width series. Height series are numbered 7, 9, 1 and 2. Bearings to ISO general plans have the same boundary dimensions when they share the same bore diameter and dimension series. If not, they have different boundary dimensions.
The boundary dimensions for metric bearings are standardized in the ISO2) general plans:ISO 15 for radial rolling bearings, except insert bearings, some types of needle roller bearings and tapered roller bearings,ISO 104 for thrust bearings,ISO 355 for tapered roller bearings.
- 3,175 mm x 6,35 mm x 2,779 mm ISO R144-2RS ISO Bearing
- LM501300
- LM501349A
- 47,625 mm x 112,712 mm x 26,909 mm ISO 55187C/55443 ISO Bearing
- LL510700
- LL510749
- 44,45 mm x 87,312 mm x 30,886 mm ISO 3578/3526 ISO Bearing
- LM501300
- LM501349HP
- 220 mm x 300 mm x 60 mm ISO 23944 KCW33+AH3944 ISO Bearing
- LM501300
- LM501349
- ISO BK152012 ISO Bearing
- 1.75 in
- Kevlar Packing Seal
- 90 mm x 155 mm x 46 mm ISO T2ED090 ISO Bearing
- 13600
- 13685
- 40 mm x 65 mm x 32 mm ISO GE40/65XDO ISO Bearing
- LM501300
- LM501349HP
- ISO Q1009 ISO Bearing
- 9300
- 9380
- ISO 7016 BDB ISO Bearing
- LM501300
- LM501349HP
- ISO 81222 ISO Bearing
- Mounted Bearing
- 22222