ISO Bearing
Most rolling bearings follow ISO standard dimensions, which is a prerequisite to enable interchangeability. The ISO general plan for radial bearings provides several series of standardized outside diameters for every standard bore diameter. They are called diameter series and are numbered 7, 8, 9, 0, 1, 2, 3 and 4 (in order of increasing outside diameter). Within each diameter series, different width series exist (width series 8, 0, 1, 2, 3, 4, 5 and 6 in order of increasing width).shows diameter series 0, 2 and 3 combined with width series 0, 1, 2 and 3. For thrust bearings, height series are used instead of width series. Height series are numbered 7, 9, 1 and 2. Bearings to ISO general plans have the same boundary dimensions when they share the same bore diameter and dimension series. If not, they have different boundary dimensions.
The boundary dimensions for metric bearings are standardized in the ISO2) general plans:ISO 15 for radial rolling bearings, except insert bearings, some types of needle roller bearings and tapered roller bearings,ISO 104 for thrust bearings,ISO 355 for tapered roller bearings.
- 260 mm x 360 mm x 100 mm ISO NN4952 ISO Bearing
- 18000
- 18204X
- 630 mm x 850 mm x 300 mm ISO GE630DO ISO Bearing
- Mounted Bearing
- 22218
- 7 mm x 19 mm x 6 mm ISO 607 ISO Bearing
- 34000
- 34307
- 200,025 mm x 292,1 mm x 57,945 mm ISO M241543/10 ISO Bearing
- LM48500
- LM48548A
- 190 mm x 260 mm x 33 mm ISO NUP1938 ISO Bearing
- 14000
- 14138A
- ISO 7315 BDF ISO Bearing
- METRIC
- 51 Kg
- 45 mm x 100 mm x 57 mm ISO UC309 ISO Bearing
- M236800
- M236810
- 95 mm x 200 mm x 45 mm ISO 21319W33 ISO Bearing
- LM48500
- LM48549X
- 60 mm x 130 mm x 31 mm ISO 30312 ISO Bearing
- LL327049
- Imperial
- ISO K22X28X20 ISO Bearing
- LM48500
- LM48548P
- 600 mm x 870 mm x 118 mm ISO 60/600 ISO Bearing
- 15 mm
- 42 mm