ISO Bearing
Most rolling bearings follow ISO standard dimensions, which is a prerequisite to enable interchangeability. The ISO general plan for radial bearings provides several series of standardized outside diameters for every standard bore diameter. They are called diameter series and are numbered 7, 8, 9, 0, 1, 2, 3 and 4 (in order of increasing outside diameter). Within each diameter series, different width series exist (width series 8, 0, 1, 2, 3, 4, 5 and 6 in order of increasing width).shows diameter series 0, 2 and 3 combined with width series 0, 1, 2 and 3. For thrust bearings, height series are used instead of width series. Height series are numbered 7, 9, 1 and 2. Bearings to ISO general plans have the same boundary dimensions when they share the same bore diameter and dimension series. If not, they have different boundary dimensions.
The boundary dimensions for metric bearings are standardized in the ISO2) general plans:ISO 15 for radial rolling bearings, except insert bearings, some types of needle roller bearings and tapered roller bearings,ISO 104 for thrust bearings,ISO 355 for tapered roller bearings.
- 70 mm x 150 mm x 35 mm ISO 21314 KW33 ISO Bearing
- 2.75 in
- Kevlar Packing Seal
- 190 mm x 260 mm x 80 mm ISO NNF5038 XV ISO Bearing
- M38500
- M38547
- 95 mm x 125 mm x 26 mm ISO NKI95/26 ISO Bearing
- METRIC
- 1/12
- 114,3 mm x 228,6 mm x 49,428 mm ISO HM926740/10 ISO Bearing
- LM501300
- LM501349
- 110 mm x 200 mm x 53 mm ISO NU2222 ISO Bearing
- 28000
- 28159
- 7 mm x 11 mm x 2,5 mm ISO 617/7-2RS ISO Bearing
- LM814800
- LM814845
- 630 mm x 920 mm x 212 mm ISO NJ30/630 ISO Bearing
- 95000
- 95512X
- 100 mm x 180 mm x 46 mm ISO 2220 ISO Bearing
- 14000
- 14120A
- ISO RNA4907-2RS ISO Bearing
- 13600
- 13685
- ISO HK1410 ISO Bearing
- LM501300
- LM501349HP
- 80 mm x 110 mm x 20 mm ISO 32916 ISO Bearing
- M38500
- M38549