ISO Bearing
Most rolling bearings follow ISO standard dimensions, which is a prerequisite to enable interchangeability. The ISO general plan for radial bearings provides several series of standardized outside diameters for every standard bore diameter. They are called diameter series and are numbered 7, 8, 9, 0, 1, 2, 3 and 4 (in order of increasing outside diameter). Within each diameter series, different width series exist (width series 8, 0, 1, 2, 3, 4, 5 and 6 in order of increasing width).shows diameter series 0, 2 and 3 combined with width series 0, 1, 2 and 3. For thrust bearings, height series are used instead of width series. Height series are numbered 7, 9, 1 and 2. Bearings to ISO general plans have the same boundary dimensions when they share the same bore diameter and dimension series. If not, they have different boundary dimensions.
The boundary dimensions for metric bearings are standardized in the ISO2) general plans:ISO 15 for radial rolling bearings, except insert bearings, some types of needle roller bearings and tapered roller bearings,ISO 104 for thrust bearings,ISO 355 for tapered roller bearings.
- ISO 7313 ADF ISO Bearing
- 28000
- 28138
- 300 mm x 460 mm x 118 mm ISO 23060 KCW33+AH3060 ISO Bearing
- JP13000
- JP13049
- 2 mm x 7 mm x 3 mm ISO MR72ZZ ISO Bearing
- LM501300
- LM501349
- ISO 3812-2RS ISO Bearing
- METRIC
- 1/12
- 120 mm x 165 mm x 27 mm ISO SL182924 ISO Bearing
- 28000
- 28159
- 65 mm x 140 mm x 33 mm ISO NU313 ISO Bearing
- LM501300
- LM501349A
- 440 mm x 600 mm x 160 mm ISO NNU4988K ISO Bearing
- M229349A
- Imperial
- 6 mm x 13 mm x 3,5 mm ISO F686 ISO Bearing
- M38500
- M38549
- ISO 89309 ISO Bearing
- 28000
- 28150